Blancobent UF (20 Kg)

No. d'article31-15028
Prix $125
prix par 25 kg
Excluant les taxes
Rupture de stock
25 kg

Description

BLANCOBENT UF is a highly purified powdered bentonite allowing for 1-step protein stabilization and crossflow filtration.

• Compatible for direct dosing into symmetrical hollow fiber membrane crossflow systems
• Powdered formulation is free of crossflow damaging sand and grit
• Does not cause excessive abrasion to crossflow membranes due to the lack of large, abrasive particles (<100 µm)
• Can be prepared in room temperature water
• Always consult your crossflow manufacturer prior to use (approved for use for use with Pall Oenoflow system)
• Not recommended for use on wines that will not be crossflow filtered - use FERMOBENT PORE-TEC or NACALIT PORE-TEC depending on goals

Dosage
Bench trials recommended
Wine 20–200 g/hL

Usage
Add BLANCOBENT UF the night before or day of crossflow filtration. Add slowly to approximately 10 times its weight of room temperature water under constant stirring. Allow a rest period of 30-60 minutes, then stir again thoroughly. Let the mixture swell for 6–12 hours. Dispose of supernatant and add remaining bentonite slurry to the wine while thoroughly mixing.

Storage
Dated expiration. Store in a dry, odor-free and well-ventilated environment below 25°C (77°F). Reseal opened packaging immediately

Spécifications

Marque
Erbsloeh
Type de produit
Bentonite

Blancobent UF (20 Kg)

No. d'article31-15028
Prix $125
prix par 25 kg
Excluant les taxes
Rupture de stock
25 kg

Description

BLANCOBENT UF is a highly purified powdered bentonite allowing for 1-step protein stabilization and crossflow filtration.

• Compatible for direct dosing into symmetrical hollow fiber membrane crossflow systems
• Powdered formulation is free of crossflow damaging sand and grit
• Does not cause excessive abrasion to crossflow membranes due to the lack of large, abrasive particles (<100 µm)
• Can be prepared in room temperature water
• Always consult your crossflow manufacturer prior to use (approved for use for use with Pall Oenoflow system)
• Not recommended for use on wines that will not be crossflow filtered - use FERMOBENT PORE-TEC or NACALIT PORE-TEC depending on goals

Dosage
Bench trials recommended
Wine 20–200 g/hL

Usage
Add BLANCOBENT UF the night before or day of crossflow filtration. Add slowly to approximately 10 times its weight of room temperature water under constant stirring. Allow a rest period of 30-60 minutes, then stir again thoroughly. Let the mixture swell for 6–12 hours. Dispose of supernatant and add remaining bentonite slurry to the wine while thoroughly mixing.

Storage
Dated expiration. Store in a dry, odor-free and well-ventilated environment below 25°C (77°F). Reseal opened packaging immediately

Spécifications

Marque
Erbsloeh
Type de produit
Bentonite