Top of the page

Blancobent UF (20 Kg)

Item No. 31-15028
Price $125
Price Per 25 kg
Excl. Tax
Available
25 kg

Description

BLANCOBENT UF is a highly purified powdered bentonite allowing for 1-step protein stabilization and crossflow filtration.

� Compatible for direct dosing into symmetrical hollow fiber membrane crossflow systems
� Powdered formulation is free of crossflow damaging sand and grit
� Does not cause excessive abrasion to crossflow membranes due to the lack of large, abrasive particles (<100 �m)
� Can be prepared in room temperature water
� Always consult your crossflow manufacturer prior to use (approved for use for use with Pall Oenoflow system)
� Not recommended for use on wines that will not be crossflow filtered - use FERMOBENT PORE-TEC or NACALIT PORE-TEC depending on goals

Dosage
Bench trials recommended
Wine 20�200 g/hL

Usage
Add BLANCOBENT UF the night before or day of crossflow filtration. Add slowly to approximately 10 times its weight of room temperature water under constant stirring. Allow a rest period of 30-60 minutes, then stir again thoroughly. Let the mixture swell for 6�12 hours. Dispose of supernatant and add remaining bentonite slurry to the wine while thoroughly mixing.

Storage
Dated expiration. Store in a dry, odor-free and well-ventilated environment below 25�C (77�F). Reseal opened packaging immediately

Specifications

Brand
Erbsloeh
Product Source
Bentonite

Blancobent UF (20 Kg)

Item No. 31-15028
Price $125
Price Per 25 kg
Excl. Tax
Available
25 kg

Description

BLANCOBENT UF is a highly purified powdered bentonite allowing for 1-step protein stabilization and crossflow filtration.

� Compatible for direct dosing into symmetrical hollow fiber membrane crossflow systems
� Powdered formulation is free of crossflow damaging sand and grit
� Does not cause excessive abrasion to crossflow membranes due to the lack of large, abrasive particles (<100 �m)
� Can be prepared in room temperature water
� Always consult your crossflow manufacturer prior to use (approved for use for use with Pall Oenoflow system)
� Not recommended for use on wines that will not be crossflow filtered - use FERMOBENT PORE-TEC or NACALIT PORE-TEC depending on goals

Dosage
Bench trials recommended
Wine 20�200 g/hL

Usage
Add BLANCOBENT UF the night before or day of crossflow filtration. Add slowly to approximately 10 times its weight of room temperature water under constant stirring. Allow a rest period of 30-60 minutes, then stir again thoroughly. Let the mixture swell for 6�12 hours. Dispose of supernatant and add remaining bentonite slurry to the wine while thoroughly mixing.

Storage
Dated expiration. Store in a dry, odor-free and well-ventilated environment below 25�C (77�F). Reseal opened packaging immediately

Specifications

Brand
Erbsloeh
Product Source
Bentonite