Multi-purpose oxidizing cleaner for organic soils and molds
Destainex products are proprietary sodium percarbonate based cleaning agents with microbial neutralizing abilities. These highly effective formulations can be used at low levels to remove wine color, protein stains, mold, mildew, and biofilms from wine contact surfaces such as: stainless steel, galvanized metals, concrete, polyethylene (low and high density), polypropylene, plastics, flexible hoses, glass and powder-coated surfaces. Destainex products can be used in both automated (CIP) and manual systems. The sodium percarbonate in Destainex products are complemented with proprietary surfactants and chelation agents, water conditioning materials and rinse aids for a bright, clean and spot free neutral surface.
Choose Destainex-LF rather than Destainex if used in an application where low foam is desired.
0,5%M/V to 1,5%M/V (5g/L to 15 g/L)
Rinse the surface to be cleaned using warm water to remove all loose soil.
Prepare an adequate volume of drinking water at a temperature between 40 and 60 ° C (104 and 140°F) (typically 10% of the volume of the container to be cleaned) by accurately measuring the weight of Destainex.
Slowly add the powder to the water, mixing until a homogeneous solution is obtained. Initially, the prepared solution will have a milky appearance but will soon be clarified. Once the solution is clarified, it is ready for use. Destainex can be used manually or with automated on-site cleaning systems (CIP).
The contact time depends on the temperature and quality of the water, the amount of Destainex used and the turbulence of the contact. The average contact time is 20 minutes. When tank is clean, drain the solution and rinse with potable water to remove all residual Destainex.
Note: cleaning is most effective when soft or treated water is used.
Store in a dry, odorless environment at a temperature between 10 to 20 °C (50 and 68 °F), away from direct sunlight.